The Serial Bobcat™ provides an interface from the ADICON system to serial-controlled devices. The data transfer is output only from the Bobcat. Received data is compared to the stored message list and if a match is found it then alerts the controller of the message number.
| Size: |
• 2.5"L x 1.35"W x 0.6"H
|
|---|---|
| I/O: |
• ADNET: 2 Screw Terminals
• Power: 2 Screw Terminals*
• 9 pin DB-9 serial connector (RS-232)
• 2-wire
cable (RS-485)
* (up to 14 AWG) |
| Power: |
9-12 Volts AC or DC, 30 mA.
|